Large part placement solutions
The handling of large parts such as the high-functionality devices and connectors, the challenges posed in placing these in the SMT process, and Fuji's solutions to these issues.
Place interposers at high-speed with a high-powered vaccum – H01V head
To achieve four times the part retention power in comparison to the previously often-used H01 head. By using this head together with a dedicated design nozzle, interposers can be placed at high speed.
sFAB-D Tool Kit for Flexible Handling of New Parts
Tool kits are formulated to include claws and locators that are most used based on past shipments, to be able to flexibly respond to part additions and changes.
Solutions for handling large parts using sFAB-D
There are many cases of automotive boards such as ECUs having large connectors that exceed 100 mm in length. We suspect that the usage of such parts is going to increase in future. However, the packaging for such parts is very large and it was required to place these parts in a smaller tray to use them with conventional supply units. In addition, there was the issue in which the part supply cycles would increase because the quantity of parts supplied per tray was small.